Winyuan Technology Co., Ltd.
Main products:fusion splicer,converter,IP bridge
Contact Us
  • Contact Person : Mr. Su Jack
  • Company Name : Winyuan Technology Co., Ltd.
  • Tel : 86-571-88074976
  • Fax : 86-571-88074976
  • Country/Region : China
  • Zip : 310004

16E1 optical converter

16E1 optical converter
Product Detailed
G.703 16E1 fiber modem, optic modem fiber converter, optical converter PDH, fiber mux, fiber multiplexer optical multiplexer

OptiMux 16E1+4ETH+RS232  PDH Optical Converter

Product functionThe OPTIMUX is part of Multi E1 and Fast Ethernet transmission system family, used to build a 150Mb/s optical point-to-point link. Based on an ASIC chip; it performs the transportation of 4/8/16 E1 and a fast Ethernet at full speed. It also provides an order-wire and an auxiliary UART interface for Management. The OPTIMUX offers a highly integrated solution for the perfect function, stable performance and convenience with low power consumption.FeaturesMerges the Ethernet and time-division multiplex (TDM) transmission to the same pipe.Provides 4/8/16 E1 and 100Mb/s Fast Ethernet interface. The standard E1 interfaces comply with ITU-T G.703, G.823 and G.742. Supports either auto-negotiation or hardware configuration selection of the Ethernet operation. The Ethernet interface supports VLAN and Flow Control function. Real-time Monitoring and all necessary alarm display for easy management.Supports Local and Remote Loop-back Test.Uses standard telephone set as order-wire. Provides one transparent RS232 interface for user data links. Provides RS232 interface for Network Management.Extends the fiber link up to 120 km without any repeater.Compact single board Terminal.100~220V Ac and -48VDC power supply is optional.E1 interface Interface Rate: 2.048Mbps+-50PPMCoding: HDB3Interface signal coding: ITU-T G.703E1 Impedance : BNC 75Ω(unbalance),RJ45 120Ω(balance)Interface character: match G.703Jitter tolerance : match G.742 and G.823. 10/100 Base-T interface4*ETH interface, accord with IEEE802.3,802.3u, default configure is auto-negotiation.Interface Rate: 10/100Mbps Connector: RJ45

Optical interfaceInterface: FC/SCWavelenth: 850nm/1310nm multi-mode, 1310nm/1550nm single mode. Transmit distance: 2 Km for multi-mode, 40 Km/60Km/120Km for single mode.

Power Supply:Range of input voltage: DC-48V(-36V ~-72V); AC220V(100V ~240V)

Power consumption: 5WEnvironmental Conditions:Operating Temperature Range: 0 to +45Humidity: 95%, no condensation MechanicsLength Height Width (Depth): 483mm×44.45mm×200mmWeight: 2.5kg

16E1 optical converter

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.