Winyuan Technology Co., Ltd.
Main products:fusion splicer,converter,IP bridge
Contact Us
  • Contact Person : Mr. Su Jack
  • Company Name : Winyuan Technology Co., Ltd.
  • Tel : 86-571-88074976
  • Fax : 86-571-88074976
  • Country/Region : China
  • Zip : 310004

protocol converter 10/100BaseTX Ethernet to 4E1 interface converter

protocol converter 10/100BaseTX Ethernet to 4E1 interface converter
Product Detailed
Ethernet to 4E1 interface converter 10/100BaseTX to 4E1 protocol converter G.703 4E1 Ethernet converter LAN Ethernet bridge

4E1 to 4*Ethernet  Interface Protocol Converter


4E1-4ETH convertor provides easy conversion from 1 to 4 E1 channels to 4 x Ethernet ports. Support 1 to 4 E1 channels setting, it can detect the number of E1 chnanel and select available channel, also it's equipped with NMS GUI for remote and local monitoring purposes


1). According with IEEE 802.3, support 10Base-T, 100Base-T 2). Support flexible setting of 1 to 4 E1 channels, auto detect the number of E1 channels and time-delay, select available E1 channels and more; 3). Provide 2 loop functions: local E1 loop, remote E1 loop. 4). Ethernet transmission transparent,support AUTO-MDIX, straight and crossover auto-adapt. 5). Can transmit super-long frame of IEEE 802.1Q, support Ethernet exchanger with VLAN function. 7). Support E1 channel hot plug, and auto detect available E1 channels. 8). Support reset remote system from local system. 9). 4 E1 can have 10 ms time-delay, CRC alarm limitation can auto insulate bad-quality transmit channel by configuration, and is single direction insulation. when one direction error rate over limitation, cut only this direction, the other direction not affected. 11). Power supply option: AC96 - 260V, DC-48V. 12). Performs inverse multiplexing to send Ethernet bundled over 4E1, to get speed close to 8 Mbit/s; 13). Remote GUI NMS monitoring software in set 14). Both E1 interfaces - RJ-45 and BNC already on board.TECHNICAL SPECIFICATION:

E1 interface:interface standard:according with G.703Interface Rate:2.048Mbps+-50ppmJitter tolerance:according with G.742 and G.823.transmission capability: 4*E1clock mode: inter-clock, line-clockconnector: BNC(75Ω),RJ45(120Ω)E1 Impedance: 75Ω(unbalance), 120Ω(balance).

10/100 Base-T interface:Interface Rate: 10/100MbpsDuplex: half and full duplex self-adapt.Interface character: match IEEE802.3, IEEE802.1Q(VLAN).Connector: RJ45, support auto-mdixMAC address capability: 4096

 Working environment:power supply: AC220V, DC –48Vpower consumption: ≤5Wworking temperature: 0°C ~ 50°Cstorage temperature: -40°C ~ +70°Chumidity: 95 %

protocol converter 10/100BaseTX Ethernet to 4E1 interface converter

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.